GSC P-D S2 Cams 274/274 Billet For 4G63T Evo 9 Mivec

Description

GSC Power Division S2 Camshafts
Fits 2006 Mitsubishi Evolution IX
2.0L Turbo
These GSC Power-Division S2 (Stage 2) Cams are for the Mitsubishi Evolution 9 4G63 Turbo MIVEC engine and are designed for those with a goal of 400-700 WHP. No low end power is lost versus the stock cams when used with the larger turbos. The GSC S2 cams will show gains of 50-70 WHP over the stock cams, and in some cases more in the higher RPMs. Great for 2.0L engines with stock frame turbos revving to 9000 RPMs or for stroker motors revving to 8000 RPMs. The GSC S2 cams are suggested to run on GSC upgraded beehive valve spring replacement or can be run at the stock rev-limit and factory boost on the stock valve springs.
Specs:
Duration: 274° / 274°
Duration at 1mm: 226° / 230°
Lift (mm) 11.20mm / 11.00mm
Centerline: 128° / 113°
**If using aftermarket cam gears (especially AEM) check the bolt length, some cam gears are too thick for the OEM bolt on the Billet cams, a 40mm under head length bolt may be necessary in this case**
PROFESSIONAL INSTALLATION IS STRONGLY RECOMMENDED
Please carefully check to make sure the part you are ordering will fit your application.
WE DO NOT ACCEPT RETURNS ON PARTS THAT HAVE BEEN INSTALLED UNLESS ITEM HAS A MANUFACTURER DEFECT.
Shipping
: We ship daily Monday-Friday except holidays. We ship from multiple locations. Our parts generally ship out same or next business day. We offer combined shipping upon request, if the products can be safely packaged together. On international orders we utilize eBay Global Shipping.
Most items cannot be shipped to P.O. Boxes. If you would like to ship to a P.O. Box, please contact us before purchase.
Communication
: Excellent Communication and Customer Service is our goal! We are usually available to answer questions during East coast business hours Monday through Friday. Our goal is 100% customer satisfaction.
Return & Refund Policy
: We accept returns for replacement or refund. If you are not satisfied with your purchase and wish to make a return, please notify us within 30 days of receiving the item(s). All returned items must be in their original condition with original packaging.
Warranty Information:
Any items that have a warranty issue will be handled by the manufacturer. Please contact us and we will supply you with the manufacturers contact information.
SOME PHOTOS ARE STOCK PHOTOS AND MAY VARY FROM ACTUAL PART.
PLEASE SEE COMPLETE DESCRIPTION OF PART YOU ARE BUYING TO MAKE SURE IT IS THE PART YOU NEED.